Awning equipment
Side panel for VW T6.1/T6/T5 California awning
The attachment to the rollable anwing of the VW T6.1/T6/T5 California is very easy: roll out the awning completely, put the upper ending of the side panel over the awning’s arm and close the zipper - ready!
The guying to the ground should be done wihtout tightening to much and at an angle to offer less wind resistance and increase space within the awning.
The guying to the ground should be done wihtout tightening to much and at an angle to offer less wind resistance and increase space within the awning.
The side panel can also be rolled up and fixed to the awning arm (comp. picture above: rolled-up side panel on the awning of the silver California).
Scope of delivery: Side panel for awning made of Airtex Top, approx. 1.79 x 2.03 m (w x h), zipper fixing at the awning arms with anti-slipping inserts and hook- and-loop fastener, ground guying accessories; complete weight approx. 1.35 kg.
Design: "Reflexsilver/Red Gold".
Made in Germany.
Scope of delivery: Side panel for awning made of Airtex Top, approx. 1.79 x 2.03 m (w x h), zipper fixing at the awning arms with anti-slipping inserts and hook- and-loop fastener, ground guying accessories; complete weight approx. 1.35 kg.
Design: "Reflexsilver/Red Gold".
Made in Germany.
Part No. | Description | price including VAT |
---|---|---|
100 400 058 | Side panel for the optional awning | 174,00 € |
Z00 400 03A | Set of poles for 1 side or front panel, 2 telescopic aluminium poles, guying accessories | 49,50 € |
Front wall for VW T6.1/T6/T5 California awning and others
Attachment with special piping to the awning or to the aluminium rail of the California as well as to the TOP-RAIL.
Above, the front wall has integrated plates, into which you can hang ropes for wind bracing.
The front wall can be fixed to the awning or be placed independen from the awning as an additional sun sail (cf. picture right: yellow California). This is particularly practical in midsummer as you can generate one big shaddowed area next to the vehicle or create shadow on both sides of the vehicle.
Above, the front wall has integrated plates, into which you can hang ropes for wind bracing.
The front wall can be fixed to the awning or be placed independen from the awning as an additional sun sail (cf. picture right: yellow California). This is particularly practical in midsummer as you can generate one big shaddowed area next to the vehicle or create shadow on both sides of the vehicle.
The front wall can also be used as a separate awning on the left side of the vehicle if you want to have shadow on both sides!
Scope of delivery: Front wall for rollable awning made of Airtex Top, approx. 2.40 x 2.50 m (w x h), guying accessories; weight: approx. 2,26 kg.
Design: "Reflexsiver /Red Gold".
Made in Germany.
Scope of delivery: Front wall for rollable awning made of Airtex Top, approx. 2.40 x 2.50 m (w x h), guying accessories; weight: approx. 2,26 kg.
Design: "Reflexsiver /Red Gold".
Made in Germany.
Part No. | Description | price including VAT |
---|---|---|
100 400 061 | Front wall for the optional awning | 174,00 € |
Z00 400 03A | Set of poles for 1 side or front panel, 2 telescopic aluminium poles, guying accessories | 49,50 € |
Set for additional guying of the optional awning
The guy for the awning goes through the piping at the front of the awning and is then fixed to the ground.
The guying set is indispensable and should always be used. However in gusty winds the awning must be rolled up in order to prevent damage or loss.
Part No. | Description | price including VAT |
---|---|---|
100 400 060 | Set for guying of serial awning | 21,50 € |
Accessories for tents and awnings
1. T-tent peg, 40 cm, for very stony grounds.
2. Tin tent peg, 30 cm, for soil & stony or sandy grounds.
3. Tin tent peg, 22 cm, for soil.
4. Round headed ground nail, 30 cm, to fix the tent.
5. Hook headed ground nail, 22 cm, for dry/hard grounds.
6. Ground nail with hook, 21 cm, for stony grounds.
7. Pull-out hook for pegs, steel with plastic handle.
8. Tightening leader, 24 cm, elongation of guy leaders.
9. Guy rope 4 m with three-hole tightener.
10. Pipe clamps for telescopic bars Ø 28 mm.
11. Pipe clamps for telescopic bars Ø 25 mm.
2. Tin tent peg, 30 cm, for soil & stony or sandy grounds.
3. Tin tent peg, 22 cm, for soil.
4. Round headed ground nail, 30 cm, to fix the tent.
5. Hook headed ground nail, 22 cm, for dry/hard grounds.
6. Ground nail with hook, 21 cm, for stony grounds.
7. Pull-out hook for pegs, steel with plastic handle.
8. Tightening leader, 24 cm, elongation of guy leaders.
9. Guy rope 4 m with three-hole tightener.
10. Pipe clamps for telescopic bars Ø 28 mm.
11. Pipe clamps for telescopic bars Ø 25 mm.
Part No. | Description | price including VAT |
---|---|---|
Z00 400 001 | (1) T-tent peg, 40 cm, for very stony grounds, 2 pcs | 12,50 € |
Z00 400 002 | (2) Tin tent peg, 30 cm, for soil & stony or sandy grounds, 5 pcs | 8,50 € |
Z00 400 003 | (3) Tin tent peg, 22 cm, for soil, 10 pcs | 8,50 € |
Z00 400 005 | (4) Round headed ground nail, 30 cm, to fix the tent, 5 pcs | 5,50 € |
Z00 400 004 | (5) Hook headed ground nail, 22 cm, for dry/hard grounds, 10 pcs | 7,50 € |
Z00 400 006 | (6) Ground nail with hook, 21 cm, for stony grounds, 5 pcs | 8,50 € |
Z00 400 007 | (7) Pull-out hook for pegs, steel with plastic handle, 1 pcs | 6,50 € |
Z00 400 009 | (8) Tightening leader, 24 cm, elongation of guy leaders, 5 pcs | 6,50 € |
Z00 400 008 | (9) Guy rope 4 m with three-hole tightener, 4 pcs | 10,50 € |
Z00 400 010 | (10) Pipe clamps for telescopic bars Ø 28 mm, 5 pcs | 10,50 € |
Z00 400 011 | (11) Pipe clamps for telescopic bars Ø 25 mm, 5 pcs | 9,50 € |
Z00 300 040 | (12) Gripper clamp for rain gutter (spare parts), 3 pieces | 14,50 € |
Z00 400 02C | (13) Attachment for TOP-SAIL on piping rail with 3 clamps (suitable for TOP-RAIL as well) | 54,50 € |